// MESSAGE MANUAL_SETPOINT PACKING

#define MAVLINK_MSG_ID_MANUAL_SETPOINT 81

typedef struct __mavlink_manual_setpoint_t
{
 uint32_t time_boot_ms; ///< Timestamp in milliseconds since system boot
 float roll; ///< Desired roll rate in radians per second
 float pitch; ///< Desired pitch rate in radians per second
 float yaw; ///< Desired yaw rate in radians per second
 float thrust; ///< Collective thrust, normalized to 0 .. 1
 uint8_t mode_switch; ///< Flight mode switch position, 0.. 255
 uint8_t manual_override_switch; ///< Override mode switch position, 0.. 255
} mavlink_manual_setpoint_t;

#define MAVLINK_MSG_ID_MANUAL_SETPOINT_LEN 22
#define MAVLINK_MSG_ID_81_LEN 22



#define MAVLINK_MESSAGE_INFO_MANUAL_SETPOINT { \
	"MANUAL_SETPOINT", \
	7, \
	{  { "time_boot_ms", NULL, MAVLINK_TYPE_UINT32_T, 0, 0, offsetof(mavlink_manual_setpoint_t, time_boot_ms) }, \
         { "roll", NULL, MAVLINK_TYPE_FLOAT, 0, 4, offsetof(mavlink_manual_setpoint_t, roll) }, \
         { "pitch", NULL, MAVLINK_TYPE_FLOAT, 0, 8, offsetof(mavlink_manual_setpoint_t, pitch) }, \
         { "yaw", NULL, MAVLINK_TYPE_FLOAT, 0, 12, offsetof(mavlink_manual_setpoint_t, yaw) }, \
         { "thrust", NULL, MAVLINK_TYPE_FLOAT, 0, 16, offsetof(mavlink_manual_setpoint_t, thrust) }, \
         { "mode_switch", NULL, MAVLINK_TYPE_UINT8_T, 0, 20, offsetof(mavlink_manual_setpoint_t, mode_switch) }, \
         { "manual_override_switch", NULL, MAVLINK_TYPE_UINT8_T, 0, 21, offsetof(mavlink_manual_setpoint_t, manual_override_switch) }, \
         } \
}


/**
 * @brief Pack a manual_setpoint message
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 *
 * @param time_boot_ms Timestamp in milliseconds since system boot
 * @param roll Desired roll rate in radians per second
 * @param pitch Desired pitch rate in radians per second
 * @param yaw Desired yaw rate in radians per second
 * @param thrust Collective thrust, normalized to 0 .. 1
 * @param mode_switch Flight mode switch position, 0.. 255
 * @param manual_override_switch Override mode switch position, 0.. 255
 * @return length of the message in bytes (excluding serial stream start sign)
 */
static inline uint16_t mavlink_msg_manual_setpoint_pack(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg,
						       uint32_t time_boot_ms, float roll, float pitch, float yaw, float thrust, uint8_t mode_switch, uint8_t manual_override_switch)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
	char buf[22];
	_mav_put_uint32_t(buf, 0, time_boot_ms);
	_mav_put_float(buf, 4, roll);
	_mav_put_float(buf, 8, pitch);
	_mav_put_float(buf, 12, yaw);
	_mav_put_float(buf, 16, thrust);
	_mav_put_uint8_t(buf, 20, mode_switch);
	_mav_put_uint8_t(buf, 21, manual_override_switch);

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, 22);
#else
	mavlink_manual_setpoint_t packet;
	packet.time_boot_ms = time_boot_ms;
	packet.roll = roll;
	packet.pitch = pitch;
	packet.yaw = yaw;
	packet.thrust = thrust;
	packet.mode_switch = mode_switch;
	packet.manual_override_switch = manual_override_switch;

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, 22);
#endif

	msg->msgid = MAVLINK_MSG_ID_MANUAL_SETPOINT;
	return mavlink_finalize_message(msg, system_id, component_id, 22, 106);
}

/**
 * @brief Pack a manual_setpoint message on a channel
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param chan The MAVLink channel this message was sent over
 * @param msg The MAVLink message to compress the data into
 * @param time_boot_ms Timestamp in milliseconds since system boot
 * @param roll Desired roll rate in radians per second
 * @param pitch Desired pitch rate in radians per second
 * @param yaw Desired yaw rate in radians per second
 * @param thrust Collective thrust, normalized to 0 .. 1
 * @param mode_switch Flight mode switch position, 0.. 255
 * @param manual_override_switch Override mode switch position, 0.. 255
 * @return length of the message in bytes (excluding serial stream start sign)
 */
static inline uint16_t mavlink_msg_manual_setpoint_pack_chan(uint8_t system_id, uint8_t component_id, uint8_t chan,
							   mavlink_message_t* msg,
						           uint32_t time_boot_ms,float roll,float pitch,float yaw,float thrust,uint8_t mode_switch,uint8_t manual_override_switch)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
	char buf[22];
	_mav_put_uint32_t(buf, 0, time_boot_ms);
	_mav_put_float(buf, 4, roll);
	_mav_put_float(buf, 8, pitch);
	_mav_put_float(buf, 12, yaw);
	_mav_put_float(buf, 16, thrust);
	_mav_put_uint8_t(buf, 20, mode_switch);
	_mav_put_uint8_t(buf, 21, manual_override_switch);

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), buf, 22);
#else
	mavlink_manual_setpoint_t packet;
	packet.time_boot_ms = time_boot_ms;
	packet.roll = roll;
	packet.pitch = pitch;
	packet.yaw = yaw;
	packet.thrust = thrust;
	packet.mode_switch = mode_switch;
	packet.manual_override_switch = manual_override_switch;

        memcpy(_MAV_PAYLOAD_NON_CONST(msg), &packet, 22);
#endif

	msg->msgid = MAVLINK_MSG_ID_MANUAL_SETPOINT;
	return mavlink_finalize_message_chan(msg, system_id, component_id, chan, 22, 106);
}

/**
 * @brief Encode a manual_setpoint struct into a message
 *
 * @param system_id ID of this system
 * @param component_id ID of this component (e.g. 200 for IMU)
 * @param msg The MAVLink message to compress the data into
 * @param manual_setpoint C-struct to read the message contents from
 */
static inline uint16_t mavlink_msg_manual_setpoint_encode(uint8_t system_id, uint8_t component_id, mavlink_message_t* msg, const mavlink_manual_setpoint_t* manual_setpoint)
{
	return mavlink_msg_manual_setpoint_pack(system_id, component_id, msg, manual_setpoint->time_boot_ms, manual_setpoint->roll, manual_setpoint->pitch, manual_setpoint->yaw, manual_setpoint->thrust, manual_setpoint->mode_switch, manual_setpoint->manual_override_switch);
}

/**
 * @brief Send a manual_setpoint message
 * @param chan MAVLink channel to send the message
 *
 * @param time_boot_ms Timestamp in milliseconds since system boot
 * @param roll Desired roll rate in radians per second
 * @param pitch Desired pitch rate in radians per second
 * @param yaw Desired yaw rate in radians per second
 * @param thrust Collective thrust, normalized to 0 .. 1
 * @param mode_switch Flight mode switch position, 0.. 255
 * @param manual_override_switch Override mode switch position, 0.. 255
 */
#ifdef MAVLINK_USE_CONVENIENCE_FUNCTIONS

static inline void mavlink_msg_manual_setpoint_send(mavlink_channel_t chan, uint32_t time_boot_ms, float roll, float pitch, float yaw, float thrust, uint8_t mode_switch, uint8_t manual_override_switch)
{
#if MAVLINK_NEED_BYTE_SWAP || !MAVLINK_ALIGNED_FIELDS
	char buf[22];
	_mav_put_uint32_t(buf, 0, time_boot_ms);
	_mav_put_float(buf, 4, roll);
	_mav_put_float(buf, 8, pitch);
	_mav_put_float(buf, 12, yaw);
	_mav_put_float(buf, 16, thrust);
	_mav_put_uint8_t(buf, 20, mode_switch);
	_mav_put_uint8_t(buf, 21, manual_override_switch);

	_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_SETPOINT, buf, 22, 106);
#else
	mavlink_manual_setpoint_t packet;
	packet.time_boot_ms = time_boot_ms;
	packet.roll = roll;
	packet.pitch = pitch;
	packet.yaw = yaw;
	packet.thrust = thrust;
	packet.mode_switch = mode_switch;
	packet.manual_override_switch = manual_override_switch;

	_mav_finalize_message_chan_send(chan, MAVLINK_MSG_ID_MANUAL_SETPOINT, (const char *)&packet, 22, 106);
#endif
}

#endif

// MESSAGE MANUAL_SETPOINT UNPACKING


/**
 * @brief Get field time_boot_ms from manual_setpoint message
 *
 * @return Timestamp in milliseconds since system boot
 */
static inline uint32_t mavlink_msg_manual_setpoint_get_time_boot_ms(const mavlink_message_t* msg)
{
	return _MAV_RETURN_uint32_t(msg,  0);
}

/**
 * @brief Get field roll from manual_setpoint message
 *
 * @return Desired roll rate in radians per second
 */
static inline float mavlink_msg_manual_setpoint_get_roll(const mavlink_message_t* msg)
{
	return _MAV_RETURN_float(msg,  4);
}

/**
 * @brief Get field pitch from manual_setpoint message
 *
 * @return Desired pitch rate in radians per second
 */
static inline float mavlink_msg_manual_setpoint_get_pitch(const mavlink_message_t* msg)
{
	return _MAV_RETURN_float(msg,  8);
}

/**
 * @brief Get field yaw from manual_setpoint message
 *
 * @return Desired yaw rate in radians per second
 */
static inline float mavlink_msg_manual_setpoint_get_yaw(const mavlink_message_t* msg)
{
	return _MAV_RETURN_float(msg,  12);
}

/**
 * @brief Get field thrust from manual_setpoint message
 *
 * @return Collective thrust, normalized to 0 .. 1
 */
static inline float mavlink_msg_manual_setpoint_get_thrust(const mavlink_message_t* msg)
{
	return _MAV_RETURN_float(msg,  16);
}

/**
 * @brief Get field mode_switch from manual_setpoint message
 *
 * @return Flight mode switch position, 0.. 255
 */
static inline uint8_t mavlink_msg_manual_setpoint_get_mode_switch(const mavlink_message_t* msg)
{
	return _MAV_RETURN_uint8_t(msg,  20);
}

/**
 * @brief Get field manual_override_switch from manual_setpoint message
 *
 * @return Override mode switch position, 0.. 255
 */
static inline uint8_t mavlink_msg_manual_setpoint_get_manual_override_switch(const mavlink_message_t* msg)
{
	return _MAV_RETURN_uint8_t(msg,  21);
}

/**
 * @brief Decode a manual_setpoint message into a struct
 *
 * @param msg The message to decode
 * @param manual_setpoint C-struct to decode the message contents into
 */
static inline void mavlink_msg_manual_setpoint_decode(const mavlink_message_t* msg, mavlink_manual_setpoint_t* manual_setpoint)
{
#if MAVLINK_NEED_BYTE_SWAP
	manual_setpoint->time_boot_ms = mavlink_msg_manual_setpoint_get_time_boot_ms(msg);
	manual_setpoint->roll = mavlink_msg_manual_setpoint_get_roll(msg);
	manual_setpoint->pitch = mavlink_msg_manual_setpoint_get_pitch(msg);
	manual_setpoint->yaw = mavlink_msg_manual_setpoint_get_yaw(msg);
	manual_setpoint->thrust = mavlink_msg_manual_setpoint_get_thrust(msg);
	manual_setpoint->mode_switch = mavlink_msg_manual_setpoint_get_mode_switch(msg);
	manual_setpoint->manual_override_switch = mavlink_msg_manual_setpoint_get_manual_override_switch(msg);
#else
	memcpy(manual_setpoint, _MAV_PAYLOAD(msg), 22);
#endif
}