Open-Source CableServer for Impact
==================================

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

ONLY IMPACT 8.2i WAS TESTED

PLEASE SEND FEEDBACKS TO zoltan_csizmadia at yahoo dot com!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Usage:
------

cblsrv [-d level] [-p port] [-c type[:addr]]
    level     Debug level (0-3). (Default=1)
    port      Server port (default=2000)
    type      Cable type:
                dlc5     Xilinx Parallel III
                bb       Altera ByteBlaster
                amontec  Amontec JTAGkey(FT2232 base)
    
E.g: cblsrv -d 3 -c dlc5:0x378
     cblsrv -d 3 -p 2000 -c bb:/dev/parport0\n");


How to use cable server
-----------------------

Start:
1. Start cable server
2. Start Impact software
3. Go to Output/Cable Setup menu
4. Select cable 'Parallel III', 'Remote' mode, set ip address (may use localhost) and hit Ok

Stop:
1. Go to Impact Output/Cable disconnect menu
2. Hit CTRL+C in server console